The Platinum Cannon Shipwreck - 20th Century Alchemy- Chapter 2- History-4

The Platinum Cannon Shipwreck
A modern tale of Alchemy
Info@Globemerchant.com

Chapter 2 HISTORY

With independent verification, it was time to roll?up the sleeves to determine the mechanism?the theoretical cause for the reaction and establish experimental evidence to validate the mechanics. The process was much too detailed to attempt at Jack's location. With the financial support of Mr. Thom Robinson, Gold Spinners International, and the personal support of Mr. Lee Smith, Lake City, Florida, I was able to conduct the next phase of research at Mr. Smith's laboratory.

I was at an advantage in the research f or I was aware of the reaction with a fair opinion as to the cause, or as I termed it, the "Trigger Mechanism." The following were the targeted goals of the three month research program in Lake City:

-Replication of the original experiment using different black sands.

-Acceleration/deceleration of the transmutive elements. This was to validate the mathematical pathways I had established.

-Validation of secondary and tertiary radioactive decay modes since primary radiation was confirmed to be enveloped within the heat matrix.

-Simplification of the Keller Process to eliminate multiple process steps. Jack's transmutive process was stable; however, the collection process left a lot to be desired. During the transmutive phase, he produced millions and millions of precious metal atoms. These atoms were sporadically located throughout the after burn magma. He had no chemical process to cause them to group together in the original burn so they could be easily collected during the fluxing process.

-Establish the parameters for the next phase of experimentation.

To start, Lee and I processed a number of ores to view the different effects. Black sands from Canada and Arizona were selected for their "known" distinctive qualities. I had predicted the following nuclear pathways:

Mercury ---> Platinum + Helium
*Mercury ---> Gold + Helium
Cadmium ---> Palladium + Helium
*Cadmium ---> Silver + Helium
Indium ---> Silver + Helium
Silver ---> Rhodium + Helium
*Silver ---> Palladium + Helium
Palladium ---> Ruthenium + Helium
Gold ---> Iridium + Helium
*Platinum ---> Iridium + Helium

Note: Actually, these are multi?step reactions with secondary steps not shown. They will be discussed in detail in Chapter III.)

After undertaking a replication of the Keller Process to insure repetition, I resolved the collection process during the burn cycle by simply adding a proportional molar weight of lead which created a high temperature amalgamator. This caused the atomic particles to be collected into nodules immediately upon formation. Also, there was a secondary benefit from the lead, for within the residue are newly created radioactive elements. These radioactive isotopes decay in short order, nominally 18?35 hour half-lifes, or less than eight days total. The lead collector acts as a particle shield to absorb a portion of the beta radiation decay which would normally be emitted to the atmosphere.

Now, with replication and homogeneity occurring within the experiments, the next phase was the confirmation of whether my theorized mathematical reactions were correct or not. This was checked and cross checked with the follow matrix:

	Yes	No
Was the original mineral quantitatively sufficient in mercury to produce the amount of gold witnessed?	X
By adding "X" percent in grams of mercury, did the gold production definitely increase?	X
After chemical removal of all mercury, was there any indication of newly transmuted gold?		X

After the confirmation of the starting element from which the NEW gold was synthesized, it was a simple process to repeat the procedure for the synthetic production of silver, palladium and rhodium. Confirmation of the mechanical process was also confirmed for these elements.

Another Mystery
Click here to View
The Alien Video